Hayward W3CATPP2000
CAT 2000 Professional Package

The CAT 2000^® constantly monitors pH and sanitizer activity (chlorine, bromine, even salt systems) and automatically implements chemical feeding in proportion to demand for picture-perfect water quality at all times.

• Digital, microprocessor-based design with flash technology
• Advanced Control Features including proportional feed
• Weatherproof membrane switch front panel interface
• All factory settings are permanently stored in memory
• Simple installation, setup and operation
• Compatible with all types of chemical feed equipment
• Dry-contact outputs provided for salt-chlorine systems
• 5-year limited warranty on controller; 2-year limited warranty on sensors
• NSF/ANSI Standard 50 Certified

TECHNICAL SPECIFICATIONS

Display Range: pH 0.0 - 9.9, ORP 100 - 995 mV 

Setpoint Range: pH 7.0 - 8.0, ORP 525 - 995 mV 

Default Settings: pH 7.5, ORP 650 mV

Calibration Range: pH 2.0 pH +/- 

Control Accuracy: pH 0.1 pH, ORP 5.0 mV

Mode Selections: pH Feed Auto/Off/Manual ORP Feed Auto/Off/Manual pH Selection Acid/Base pH Mode Auto/Set/Calibrate ORP Mode Auto/Set Safety Systems: pH & ORP Audible & Visual Alarms Controller Unit Diagnostic Self Test Required Flow Sensor Optional Remote Alarm pH & ORP Sensors: Casing Material Molded ABS Junction Type Teflon Reference Wet End ½" NPT Connector Shielded BNC

Sensor Output Signal Requirements: 0-14 pH 0-1000mV ORP

Power Input: 120/240 Volt AC, 10 AMP 50/60 Hz 

Outputs: pH Feed 4 Amp / 120 VAC 4 Amp/ 240 VAC 1 Amp / Dry Contact ORP Feed 4 Amp / 120 VAC 4 Amp / 240 VAC 1 Amp / Dry Contact Remote Alarm 1 Amp / Dry Contact

Cat 2000 Pro-Pack Includes:

• (1) CAT 2000 Water Chemistry Controller
• (1) Professional Series pH Sensor with 24” Cable and BNC Connector
• (1) Professional Series ORP Sensor with 24” Cable and BNC Connector
• (2) BNC Connector Protective Covers (Remove to Connect Sensors)
• (2) Sensor Storage Containers
• (1) CAT 2000 Owner's Manual
• 5-year limited warranty on controller; 2-year limited warranty on sensors

• (1) PVC Backboard with Mounting Holes and Stainless Hardware
• (1) Machined Acrylic Flow Cell assembled with:
• (3) 1/4” NPT x 3/8” Tubing Asahi Ball Valves
• (1) Rotary Flow Sensor with Cable and Specialty Connector
• (1) 30’ Roll, Blue Poly Installation Tubing (3/8” OD)
• (2) 1/4” NPT x 3/8” Tubing True-Seal Connectors
• (1) Pro-Pack Quick Start Guide