HeaderTop
Product Catalog   |  Parts Catalog   |  Expert Advice & Tech Tips   |  Ask the Pros  (201) 448-9767  |   Help Center  |  About Us

Acu-Trol (PENTAIR) M6003
Acu-Trol Sensors without Cable.

Item #: AMM6003  MPN : M6003

$423.85 - $593.60

Type Selection

 Not Available
NOTIFY ME WHEN AVAILABLE
Back ordered products usually ship in 1-2 weeks. Contact us for more detail.
This is an obsolete Item

Acu-Trol (PENTAIR) M6003 Acu-Trol Sensors without Cable. Description

Acu-Trol ORP, pH and Gold Tip Salt Water Sensors.

Description

The Acu-Trol industrial ORP, pH and Gold Tip Salt Water sensors from Pentair Pool Products are a brand you can trust. They have a removable bulb guard, housing ring, and include a rubber o-ring replacement.

For Acu-Trol AK110, AK2100, AK600 and Control-O-Matic PoolWarden Controllers.

Features

  • 1/2 inch NPT standard thread
  • Female BNC connection
  • Silver/Silver Chloride gel in dynagen
  • Double junction for long life
  • Genuine Acu-Trol replacement part

Keeping Your Sensors Clean

Your sensors should be cleaned regularly, depending on bather load and characteristics specific to your facility. It's a relatively easy process. First, turn off your controller and all feeders. Close flow cell valves. Remove the sensors from the flow cell by unscrewing by hand and disconnect connectors. Carefully place your sensors into a clean container with water to ensure the tip remains wet.

Next, using a soft toothbrush, gently scrub the white ring and the tips of the sensor (at bottom) with regular toothpaste. Any oil or calcium buildup should be scrubbed with a mild degreasing detergent. Once cleaned, you can rinse the probes with the clean water in your container. Replace Teflon tape (with new tape) and reinstall the sensors by hand tightening only After reconnecting to be controller, you will need to manually test and balance your water.