Century Products H755
3HP, 208-230/460V, 9.8-9.6/4.8 A, 3PH, 56Y Frame ODP Motor
$731.90
$764.75
Century Products H755 3HP, 208-230/460V, 9.8-9.6/4.8 A, 3PH, 56Y Frame ODP Motor Description
These quality Magnetek Century Square Flange Motors are found on many brands of pool pump. Some of these pool pump brands are Sta-Rite, American Products, Pentair, Waterco, Premier Springwater, Waterway, Jandy, Flotec, Red Jacket, Sears Jet, and others.
These motors directly replace the "original" motor that came with your pool pump. No pump manufacturer manufactures their own motors. We sell Century Electric motors because we have found them to be long lasting and reliable. Century Electric Motor is now part of A.O. Smith.
In our chart below, we match "uprated" motors to their "full rated" equivalents. An uprated motor and a full rated motor are often the same motor with two different labels. We have attempted to simplify this with the chart below.
Magnetek Century Square Flange Motor Features:
- Automatic thermal protection,
- Capacitor start.
- Stainless steel threaded shaft.
- Sealed Ball Bearings.
- Maximum Temperature 50 Degrees Celsius ambient.
- Class B Insulated.
- 60 Hertz.
- Full Rate Energy Efficient Models are suitable for use at 50 Hertz (1.0 S.F.).
- 56Y Frame.
- Single phase.
- Single speed (3450 RPM).
- Rotation - CCW at Pump End.
General Specifications
UPC: | 786674024343 | Weight: | 35.00 LB |
Packaged Length: | 16 IN | Packaged Width: | 9.5 IN |
Packaged Height: | 11 IN |
Nameplate Specifications
Output HP: | 3.0 Hp | Output KW: | 2.2 kW |
Frequency: | 60 Hz | Voltage: | 208-230/460 V |
Current: | SF 9.8-9.6/4.8 A | Speed: | 3450 rpm |
Service Factor: | 1.15 | Phase: | 3 |
Duty: | Continuous | Insulation Class: | B |
Frame: | Y56Y | Enclosure: | Drip Proof |
Thermal Protection: | None | Ambient Temperature: | 50 °C |
UL: | Recognized | CSA: | Y |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Polyphase, Induction Type, Single Or Dual Voltage | Poles: | 2 |
Rotation: | Reversible Counterclockwise | Mounting: | Round |
Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball | Frame Material: | Rolled Steel |
Shaft Type: | 1/2 Threaded | Overall Length: | 13.90 in |
Frame Length: | 9.50 in | Shaft Diameter: | 0.625 in |
Shaft Extension: | 0.91 in |