A.O. Smith UCT1102
1HP, 115/230V, 5.5/11.0 A, 56J Frame, EE, Up-Rate ODP Motor
$385.55
$402.85
A.O. Smith UCT1102 1HP, 115/230V, 5.5/11.0 A, 56J Frame, EE, Up-Rate ODP Motor Description
These quality A.O. Smith Threaded Shaft Motors are found on many brands of pool pump. Some of these pool pump brands are Hayward, Jacuzzi, and others.
These motors directly replace the "original" motor that came with your pool pump. No pump manufacturer manufactures their own motors. We sell A.O. Smith motors because we have found them to be long lasting and reliable. A.O. Smith manufactured motors are the only brand of replacement motor we use in our local repair work.
In our chart below, we match "uprated" motors to their "full rated" equivalents. An uprated motor and a full rated motor are often the same motor with two different labels. We have attempted to simplify this with the chart below.
A.O. Smith Threaded Shaft Motor Features:
- All copper windings.
- Automatic thermal protection,
- Capacitor start.
- Open drip proof design.
- Stainless steel threaded shaft.
- Sealed Ball Bearings.
- "1081" Motor Design.
- Maximum Temperature 50 Degrees Celsius Ambient.
- NEMA "56J" Face Mount.
- 60 Hertz.
- Single phase.
- Single speed (3450 RPM).
- Rotation - CCW at Pump End.
General Specifications
| UPC: | 786674032904 | Weight: | 25.00 LB |
| Packaged Length: | 16 IN | Packaged Width: | 9.5 IN |
| Packaged Height: | 11 IN |
Nameplate Specifications
| Output HP: | 1 Hp | Output KW: | 0.75 kW |
| Frequency: | 60 Hz | Voltage: | 230/115 V |
| Current: | 5.5/11.0 A | Speed: | 3450 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Continuous | Insulation Class: | B |
| Frame: | 56J | Enclosure: | Open Drip Proof |
| Thermal Protection: | Automatic | Ambient Temperature: | 50 °C |
| UL: | Recognized | CSA: | Y |
| Number of Speeds: | 1 |
Technical Specifications
| Electrical Type: | Capacitor Start Capacitor Run | Poles: | 2 |
| Rotation: | Counterclockwise Pump End | Mounting: | Round |
| Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
| Opp Drive End Bearing: | Ball | Frame Material: | Rolled Steel |
| Shaft Type: | 7/16 Threaded | Overall Length: | 14.26 in |
| Frame Length: | 8.32 in | Shaft Diameter: | 0.625 in |
| Shaft Extension: | 2.565 in |
