View Cart
Replacement Parts for the
Super-Flo Offset Pump
by Waterway
Most of the parts for this pump are no longer available. The Aqua-flo FMXP2 Pump will fit in it's place without plumbing modification and has a very similar flow curve. (As long as your suction and discharge are the same size. If your suction is larger than the discharge you will have to plumb in a smaller suction union.)
You can replace the wet end and re-use your motor if you have a 48 frame motor. CLICK HERE
The key number refers to the number on the schematic above.
| Key # - Item Name | Item # | Price | Qty |
|
1 - 3/8" Plug
view picture |
715-1201 | $1.94 | |
|
2 - O-Ring For Drain Plug
view picture |
805-0014 | $0.77 | |
|
3 - Screw, #8-32 x 5/8" Phillips 18-8
view picture |
819-1110 | $1.32 | |
| 4 - Faceplate, Spa Volute, 2" Suction | 311-1190 |
Obsolete |
|
|
4 - Faceplate, Spa Volute, 2-1/2" Suction
view picture |
311-1200 |
Obsolete |
|
|
5 - O-Ring (805-0256) view picture |
O-108 | $4.40 | |
| 6 - Impeller, 1 HP | 310-4110 |
Obsolete |
|
| 6 - Impeller, 1-1/2 HP | 310-4120 |
Obsolete |
|
| 6 - Impeller, 2 HP | 310-4130 |
Obsolete |
|
| 6 - Impeller, 3 HP | 310-4140 |
Obsolete |
|
| 6 - Impeller, 4 HP | 310-4150 |
Obsolete |
|
|
7 - Seal - 5/8" Mechanical
view picture |
PS-1000 | $6.39 | |
| 9 - Pump Volute, Offset Discharge | 315-1200 |
Obsolete |
|
|
10 - Water Slinger
view picture |
313-1400 | $1.19 | |
| WATERWAY SUPER-FLO COMPLETE OFFSET SPA PUMP | - |
- |
|
The key number refers to the number on the schematic above.
Other Waterway Plastics Pumps & Motors Models:
Center Discharge Spa Pump Wet End
Executive Spa Pump Parts - 48 Frame Version
Executive Spa Pump Parts - 56 Frame Version
Hi-Flo CSA Side Discharge 48-Frame Pump
Hi-Flo Side Discharge Pool Pump
Hi-Flo Side Discharge Spa Pump
Spa Flo and Iron Might Wet End
Supreme 48-Frame Above-Ground Pool Pump
